BEINING UPS Power Choice

BEINING UPS Power Supply Selection Guide
(Based on application scenarios, power requirements, performance metrics, and after-sales support, the industrial-grade ENERTRONIC I series is recommended as the core solution for its modular design, high reliability, and wide temperature adaptability.)

I. Application Scenarios & Power Requirements

1. Industrial Automation Production Lines
   • Requirements: Millisecond-level power backup for PLCs, sensors, and other critical equipment to prevent production halts due to data loss.
   • Recommended Model: ENERTRONIC I Series (10KVA–200KVA)
     • Supports 3-phase input/1-phase output.
     • Dynamic response time <10ms, voltage deviation ±1%.
2. Power Plants & Nuclear Power Stations
   • Requirements: High-reliability power for monitoring systems and excitation systems to avoid data loss or generator excitation failure.
   • Recommended Model: ENERTRONIC I Series (Nuclear-Grade Certified)
     • Meets IEEE, RCC-E, IEC, and Westinghouse standards.
     • MTBF >250,000 hours, operates in -15°C to 50°C environments.
3. Data Centers & Telecom Base Stations
   • Requirements: Modular design for N+1 redundancy, low PUE, and uninterrupted data transmission.
   • Recommended Model: ENERTRONIC III Series

     • Supports parallel operation and extended battery runtime.

II. Key Performance Metrics

1. Input Specifications
   • Voltage Range: 380V/400V/415V ±15%, frequency 50Hz/60Hz ±10%.
   • Power Factor: ≥0.99, input THD <5% (reduces grid interference).
2. Output Specifications
   • Voltage Stability: <±2% voltage drop during 0–100% load changes, stabilization time ~1ms.
   • Overload Capacity: 150% rated current for 60 seconds, 120% for 10 minutes. Short-circuit current up to 3× rated value.
3. Battery & Runtime

   • Battery Types: Supports lead-acid, VRLA, and Ni-Cd batteries (optional Li-ion expansion).

   • Charging Efficiency: IGBT-based rectifier recharges discharged batteries to 95% in 12 hours. Temperature compensation supported.

III. Reliability Design & Environmental Adaptability

1. Modular Architecture
   • Independent charger and inverter modules support hot-swappable replacement.
   • Integrated static bypass switch and manual bypass for seamless fault transfer.
2. Protection Level
   • IP20 Standard: Dust and pollution resistance for industrial environments.
   • Redundant Ventilation: Forced cooling design supports continuous operation at 50°C.
3. Nuclear-Grade Certification

   • Compliant with IEEE, RCC-E, IEC, and Westinghouse standards for harsh environments.

IV. Intelligent Management & Scalability

1. Communication Interfaces
   • Supports Modbus, Profibus, Ethernet, and SNMP for integration with SCADA, ESD, DCS, and BMS systems.
   • Standard RS232/RS485 interfaces; optional Profibus and TCP/IP.
2. Remote Monitoring
   • Real-time battery status and system alert tracking.
   • Fault prediction and event logging (stores up to 1,200 events).
   • Intelligent balancing adjusts individual battery states (discrepancy <3%).
3. Scalability

   • Parallel operation supported for future capacity expansion via additional battery packs and power modules.

V. Brand Reputation & After-Sales Support

1. Market Credibility
   • Founded in 1938, BEINING (Germany) specializes in industrial-grade UPS systems with over 20,000 installations worldwide.
   • Localized services in China via Beijing Soronsen Technology, combining German engineering with Chinese market needs.
2. After-Sales Services

   • National Service Network: 28 provincial spare parts warehouses with 4-hour emergency response.

   • Battery Recycling: 99.8% lead recovery rate reduces environmental costs.

VI. Recommended Models & Configuration Tips

Model	Power Range	Ideal Scenarios	Core Advantages
ENERTRONIC I	10KVA–200KVA	Industrial automation, nuclear plants	Nuclear certification, wide temperature range, modular design
ENERTRONIC III	10KVA–200KVA	Data centers, telecom bases	N+1 redundancy, low PUE, scalability
Thyrotronic	3kW–120kW	DC power systems	High-precision rectification, multi-battery support

Selection Tips:

• For industrial automation or nuclear plants, prioritize the ENERTRONIC I series for its reliability and modularity.

• For data centers or telecom bases, choose the ENERTRONIC III series for redundancy and energy efficiency.

• Ensure UPS capacity is 120%–130% of peak load to reserve redundancy.

Final Recommendation:
BEINING’s ENERTRONIC I series offers the best balance of cost, performance, and adaptability for most industrial applications, while the III series excels in data-intensive environments. Always verify compatibility with local grid standards and consult BEINING’s technical team for customized solutions.